Quickie Q2 Lite Construction Manual - page 253
Other manuals for Q2 Lite:
Owner's Manual, Owner's Manual
of
299
MOUNTING THE ENGINE
.....
A typical engine mount assembly is shown in the sketches. Mount
the engine permanently.
MOUNTING THE PROPELLER
.....
The propeller is delivered to the builder with the mounting holes
pre9rilled.
.....
Make EM3 from a piece of 0.25" thick 606IT6 Aluminum. A full size
pattern is provided.. Use the predrilled propeller to drill the six bolt
holes in the EM3.
.....
The propeller is mounted with 6 AN6-37A bolts. Note that the
spinner is not shown in the illustrations because complete mounting
instructions are included with the spinner itself.