Quickie Q2 Lite Construction Manual - page 188
Other manuals for Q2 Lite:
Owner's Manual, Owner's Manual
of
299
Q2 Plans - Chapter 11 - Page 11-04
.....
Next, study the sketches carefully to understand the routing and
function of the brake cable. Depressing the toe brake (Q2BSWl) pulls the
cable, which travels around the pulley attached to BS2 and through a
short piece of Nylaflow tubing to a second pulley cantilevered off the
shear web of the canard. From there it travels outboard through the
Nylaflow tubing buried in the elevator slot foam core.
.....
BS3 is a plywood block bonded to the canard in order to cantilever
that second pulley. The plywood should be bonded to the canard with flox
and 2 BID.
.....
Strive for straight line travel on all cable runs where practical
to avoid unnecessary friction and wear.