Cabletron Systems FRM User Manual - page 102
8-14
Frame Relay Module 4. 0 User G uide, Rev 01
Configuring Logical X.25 Ports
To display all logical ports configured on the FRM, press
[A], [D], [E], [A]
from the
Main Menu. This will display a list of all PVCs and logical ports.
To configure a logical port, press
[A]
(
Configuration
), then
[C]
(
Configure Ports
), then
[D]
from the Main Menu. When prompted, enter:
●
RLP
containing the port:
0–2
. (The default is
0
.) (RLP locations are shown in
Figure 6-1
.)
●
Frame Relay Port
:
0–7
. (The default is
0
.) (Port locations are shown in
Figure 6-2
.)
●
Logical Port
:
8–63
. (The default is
8.
)
The display for an existing port will show the configured parameter values, while the
display for a new port will contain default database values, shown in the following
figure.
Figure 8-5 Logical Port Screen 1
[A],[C],[D]
from Main Menu
There are four Logical Port screens. Selecting the entry
X.25 Logical Port - Screen "n"
at each of the first three screens will display the next screen, and pressing
[F3]
will
display the previous screen.
Any menu items preceded by asterisks instead of letters cannot be changed. These are
displayed only because the software code for the menu is shared with physical port
configuration.
If you want to configure one or more closed user groups (CUGs) for the port, press
[N]
at the third screen. (Otherwise, you do not need to configure anything on the fourth
screen.)
Node N ame= node_xyz
Logical Port Parameters (s creen 1 of 4)
*
RLP:
0
Port:
0
Logical Port: 8
*
I/O: V .35
Databas e
A Mapped DLC I N umber
16
B Block ed Port Flag
N
C Con nection Priority
0
D Band width Allocation Group
0
E Encaps ulation Method
RFC1490
F Modulo
0 Modulo 8
G Maximu m LA PB Win dow Size
7
H N2 Retransmit C ount
20
I
T1 Retran smit Period (msec)
3000
J
T2 Wait Ack Period (msec)
1000
K T3 Lin k A live Period (sec)
5
L Logical DCE
Y
M X.25 Logical Port - S creen 2
Op tion :