Cabletron Systems FRM User Manual - page 306
20-6
Frame Relay Module 4. 0 User G uide, Rev 01
●
Frames/sec (*10)
– number of frames transmitted/received per second over the
five-second reporting interval, multiplied by 10.
●
DiscF/sec (*10)
– number of outgoing/incoming discarded frames per second
over the five-second reporting interval, multiplied by 10.
Information in a Non-Frame Relay Display:
X.25 frame-level statistics are counts (per second, multiplied by 10) of these standard
LAPB commands and responses:
SABM
(set asynchronous balanced mode) (un-numbered command)
UA
(un-numbered acknowledgment) (un-numbered response)
DISC
(disconnect) (un-numbered command)
DM
(disconnect mode) (un-numbered response)
FRMR
(frame reject) (un-numbered response)
REJ
(reject) (supervisory command or response)
RR
(receive ready) (supervisory command or response)
RNR
(receive not ready) (supervisory command or response)
INFO
(information) (information transfer, command)
Frame Relay Utilization Statistics
Frame Relay Utilization statistics track traffic over a frame relay DLCI, and monitor
the usage by each configured group on that DLCI.
Press
[H]
at the Statistics Menu and, when prompted, enter:
●
RLP
:
0
on FRM/2/3,
0–2
on FRM. (Default is
0
.)
●
Port
:
0–7
. (Default is
0
.)
●
DLCI
:
16–991
. (Default is
16
.)
●
Report Interval
(in seconds):
5–65535
. (Default is
5
.)