Cabletron Systems FRM User Manual - page 156
10-2
Frame Relay Module 4. 0 User G uide, Rev 01
Configuring BSC Interactive Port Records
Once the necessary Node, Line Processor, and protocol parameters have been con-
figured, press
[A]
at the Port Configuration Menu (or
[A], [C], [A]
from the Main Menu.
When prompted, enter:
●
RLP
containing the port:
0–2
. (The default is
0
.) (RLP locations are shown in
Figure 6-1
.)
●
Port
:
0–7
. (The default is
0
.) (Port locations are shown in
Figure 6-2
.)
The display for an existing port will show the configured parameter values, while the
display for a new port will show default database values. (See
Table 10-1
on page 10-
4.) The following figure is an example of an existing port.
Figure 10-1 BSC Interactive Port Record
[A],[C],[A]
from Main Menu
If
BSC Type
(item J) is
2-HPAD
, item K will be
Answer Non-Configured
.
After making any changes, be sure to press
[F7]
to update the
system memory. Otherwise, the changes will not take effect until
the next re-boot of the FRM.
Pressing
[L]
lists more parameters, and pressing
[M]
displays a screen similar to the fol-
lowing. (All BSC Interactive parameters are listed in
Table 10-1
.)
Nod e Name=nod exyz
BSC I nteractive Port Parameters (screen 1 of 2)
*
R LP: 0
Port: 5
Lin k State: Lin kup
*
I /O:–V.35
Databas e
System Memory
A
Port Typ e
BSC In ter
BSC In ter
B
Phys ical Port In terface
V.35
V.35
C
Blocked Port Flag
N
N
D
Line Speed
9600 b ps
9600 b ps
E
R etrans mis sion Period (ms)
2000
2000
F
Maximum Retran smissions
5
5
G Maximum Bytes per Frame
4105
4105
H Generate Clock
Y
Y
I
R cv Clock (TT) from DTE
N
N
J
BS C Type
1–tpad
1–tpad
K A ctivate C onnection w/o poll
Y
Y
L
I nteractive Parameters - Screen 2
M S ubs criber In formation - S creen 3
Option: