Cabletron Systems FRM User Manual - page 240
15-8
Frame Relay Module 4. 0 User G uide, Rev 01
Bridge Filter Definition Parameters
Table 15-2 through Table 15-6 list the various filter parameters. Explanations of some
parameters follow the tables. Explanations of individual masks are not included below
because they were described in general under "
How Filter Masks Work
" on page 15-7.
Filter Name
helps the user identify the filter. The name is not used by the software.
Sq
is a sequence number to identify the entry.
Offset
is the number of octets into the frame to the octet that will be checked against the
Value and Mask.
Value
is used in conjunction with the
Mask
as described under "
How Filter Masks Work
" on
page 15-7.
Mask
is used in conjunction with the
Value
as described under "
How Filter Masks Work
" on
page 15-7.
Table 15-2 Bridge Generic Filter Parameters
Parameter
Valid Values
Default Value
Filter Name
1–31 characters
none
Sq
1–16
1
Offset
0–254
(octets)
0
Val ue
0–ff
(hex)
0
Mask
0–ff
(hex)
0
Del
Allows you to delete the specific entry (defined by the sequence number)