Cabletron Systems FRM User Manual - Bridge Port Statistics
20-10
Frame Relay Module 4. 0 User G uide, Rev 01
Bridge Port Statistics
Press
[A]
at the Bridge Status Displays Menu to display the configurational and oper-
ational status of all Bridge ports in the node:
Figure 20-8 Bridge Port Status Display
[C],[F],[D],[A]
from Main Menu
To display statistics for the Bridge ports on the above screen, press
[F2]
. Pressing
[PgUp]
or
[PgDn]
will display other statistics screens (if there are more), and pressing
[F2]
will return the display to Figure 20-8.
Bridge Status Displays
are described on page 19-21.
Information on the Bridge Port Statistics Display:
●
Type/Format
– identifies the interface type (LAN or frame relay) and (if frame
relay) frame format (Native LLC2 or 8023_TB, as configured in the Port
record).
●
DesignatedRoot
– is the bridge selected as
Root
in the spanning tree. The
selection of root is determined by the bridge with the lowest Bridge ID, which
consists of a
Bridge Priority
and MAC address.
●
DesignatedBridge
– is the bridge connecting to the least-cost path to the root
bridge.
●
DlyExceeded
– is the number of frames discarded because of excessive delay.
●
OutFrames
– is the number of transmitted frames.
●
InCfgShort
– is the number of received Configuration BPDUs (Bridge Protocol
Data Units) that were dropped because they were too short.
●
OutCfgBPDU
– is the number of transmitted Configuration BPDUs.
N ode Name=n ode_xyz
Bridge Port S tatus Display
Bridge I d: 0010.00000364439B
Root Port: 255
Nu m Type/Format
Statu s
Bridge State
R eceive
X mit
0
Ethern et
Active
D is abled
4294967296
4294967296
1
Token R in g
Active
Listening
4675561234
4675561234
2
Frm/Nat LLC 2
Active
Learning
4561230000
4562222100
3
Frm/8023/TB
Active
Blocking
4561231100
4561231100
PgUp
PgDn
F2:More In fo
F3:Exit