Cabletron Systems FRM User Manual - page 241
Configuring Bridging
15-9
Filter Name
helps the user identify the filter. The name is not used by the software.
Source MAC Address Value
is the MAC address in the source address field of the frame.
Destination MAC Address Value
is the MAC address in the destination address field of the frame.
Filter Name
helps the user identify the filter. The name is not used by the software.
SSAP Value
identifies the source Service Advertising Protocol (SAP).
DSAP Value
identifies the destination SAP.
Table 15-3 Bridge MAC Filter Parameters
Parameter
Valid Values
Default Value
Fi lter Name
1–31 characters
none
Source MAC Address Value
0–ffffffffff
(6 bytes)
ffffffffff
Source MAC Address Mask
0–ffffffffff
(6 bytes)
ffffffffff
Destination MAC Address Value
0–ffffffffff
(6 bytes)
ffffffffff
Destination MAC Address Mask
0–ffffffffff
(6 bytes)
ffffffffff
Table 15-4 Bridge SAP Filter Parameters
Parameter
Valid Values
Default Value
Fi lter Name
1–31 characters
none
SSAP Value
0–ff
(1 byte)
0
SSAP Mask
0–ff
0
DSAP Value
0–ff
(1 byte)
0
DSAP Mask
0–ff
0