Cabletron Systems FRM User Manual - Stopping Operation
2-10
9W004 4. 0 User G uide, Rev 01
Stopping Operation
Logging Out
If you have been working within menu operations and wish to log out, press
[F4]
at the
Main Menu. The Port Status Display screen will be displayed, with any updates. The
software will continue to run, but only those who know the password will be able to
gain access to the menus. You must press
[F1]
and enter the password to get back into
the Main Menu.
Rebooting
To reboot from within the menu level, press
[F10]
. When asked:
Reboot?
, press
[Y]
.
You cannot reboot the device from the initial Port Status Display. You must
first press
[F1]
and enter the password to get to the Main Menu.
Rebooting the device clears all connections. If you do not want to
do this, simply press
[F4]
to log out, then leave the device running.
Locally, an FRM can be rebooted via the recessed Reset button located near the top of
the module.
Shutting Down
An FRM cannot be shut down without powering down the SmartSwitch 9000;
however, the FRM can be unplugged and removed without disrupting operation of the
SmartSwitch 9000 or the other modules in the SmartSwitch 9000.
What Next?
Once you are familiar with the menus and how they work, proceed to Section II to con-
figure the database.