Cabletron Systems FRM User Manual - page 150
9-26
Frame Relay Module 4. 0 User G uide, Rev 01
Configuring LLC2 Interfaces
LLC2 Interfaces records define the types and locations of the interfaces that will carry
LLC2 traffic to or from an FRM.
To display configured interfaces, press
[C]
at the IP/LLC2/BRIDGE.IPX Interfaces
Configuration Menu:
Figure 9-9 LLC2 Interfaces Display
[A],[C],[E],[C]
from Main Menu
These interfaces can be used for either LLC2 or Bridging.
To configure an interface, press
[D]
at the LAN Interfaces Configuration Menu. When
prompted for an interface number (which is merely a sequential number to identify the
interface):
●
If modifying an existing record, enter the interface number:
0–95
.
●
If creating a new record, press
[Enter]
, which will automatically specify the next
available sequential interface number.
The display depends on the interface type. Examples are shown in the following two
figures.
N ode Name=n odexyz
R eview Bridge Ports/LLC-2 Interfaces
----------------------------------------------------------------------------------------------------------------------
I nterface N umberType RLP
Port
D LCI Format
-----------------------------------------------------------------------------------------------------------------------
1
Ethern et
2
Frame R elay
0
1
30
N ative LLC-2
3
Frame R elay
0
1
31
8025_S RB
4
Frame R elay
0
1
32
8025_S RB
5
Frame R elay
0
1
33
8023_TB
PgUp , PgD n, F3:Exit, F9:Stop R emote, F10:Ab ort