3Com NBX 100 Administrator's Manual - page 120
120
C
HAPTER
5: T
ELEPHONE
C
ONFIGURATION
The 3Com 3105 Attendant Console requires a license. You must enter a
valid device license key into the NBX NetSet utility before you can add a
3Com 3105 Attendant Console to the system.
To add a new Attendant Console:
1 Click Telephone Configuration > Attendant Console.
2 Click Add.
3 Complete in the fields and make the appropriate selections for the new
Attendant Console.
4 Click OK.
Modifying an
Attendant Console
This section describes how to modify an existing Attendant Console. You
can change an Attendant Console’s device number or associated
telephone. You must associate every Attendant Console with a
telephone.
To modify an existing Attendant Console:
1 Click Telephone Configuration > Attendant Console.
2 Click the extension of the Attendant Console that you want to modify.
3 Modify the appropriate settings.
4 Click Apply to make the changes and then click OK.
Viewing Attendant
Console Status
From the Attendant Console Status window, you can check the status of
an Attendant Console. You can also reboot the Attendant Console from
this window.
To view the status of an Attendant Console:
1 Click Telephone Configuration > Attendant Console.
2 Select the Attendant Console extension for which you want to view the
status.
3 Click the Statustab.
4 View the settings and optionally change the Dialog Refresh, Device
Refresh, and Reset Device settings. See the online Help for more
information about these fields.
5 Click Apply to apply the settings and then click OK.