3Com NBX 100 Administrator's Manual - page 81
Password Administration
81
■
Change Administrator Password — Resets the password for
administrator access to NetSet.
After you change an administrator password, make sure you record
the new password appropriately. There is no “back door” password to
use if you lose this password. If you change the default 4-digit
password to an 8-digit or longer password, you cannot revert to a
4-digit password.
■
Reset User Password — Resets the password to a telephone user’s
extension. After you reset the password, instruct the telephone user to
change to a new password as soon as possible to ensure system
security.
■
Auto Attendant Password — Limits access to Auto Attendant
settings and functions.
■
System Backup Password — Enables automated backups from an
external system.
■
General Call Data Reporting Password — Limits access to Call
Detail Reports, an optional component of the system. See
“Call
Report Settings”
on
page 82
for more information.
■
ACD Call Data Reporting Password — Limits access to ACD Call
Detail Reports.
■
Virtual Tie Lines Password — Enables calls over Virtual Tie Lines
(VTLs) to “hop off” after they reach the destination system. The call
then appears to originate at the destination system. See
Chapter 11
for more information about setting up VTLs.
■
Hunt Group Voice Mail Password— Resets the password for the
Hunt Group extension number.
■
Hunt Group Supervisory Monitoring Password— Resets the
password that allows the Hunt Group supervisor to monitor calls to
hunt group members.
■
ACD Group Voice Mail Password— Resets the password for the
ACD Group extension number.
■
ACD Group Supervisory Monitoring Password— Resets the
password that allows the ACD Group supervisor to monitor calls to
ACD group agents.
■
TAPI Voice Mail Password— Resets the password for the TAPI Route
Point extension number.