3Com NBX 100 Administrator's Manual - page 55
Ring Patterns
55
■
Speed Dial (Personal) — A device is able to store personal speed dial
extensions as zone page extensions.
■
Speed Dial (System) — A device is able to store system speed dial
extensions as zone page extensions.
All other features and desktop applications are not supported. A zone
page does not reach a device that has Do Not Disturb enabled.
When zone paging, you cannot include devices from a different Call
Processor in a local page zone. However, if your dial plan is configured to
support Virtual Tie Lines (VTLs), you can include an extension on a
different Call Processor in a zone page.
SIP telephones can neither initiate nor receive pages.
To configure Page Zones:
1 Log on to the NBX NetSet utility using the administrator login ID and
password.
2 Click Feature Settings > Page Zones.
3 See the online Help for information about how to add, modify, and
remove page zones.
Ring Patterns
You can set system-wide ring patterns, such as one, two, or three rings,
to distinguish between internal and external calls.
Do not confuse ring patterns with ringer tones, which telephone users
can set for their telephones from the NBX NetSet utility. For information
about setting a telephone user’s ringer tones, see the NBX Telephone
Guides or the User online Help.
To set ring patterns:
1 Log on to the NBX NetSet utility using the administrator login ID and
password.
2 Click Feature Settings > Ring Patterns.
3 See the online Help for more information.
Supervisory
Monitoring
Supervisory Monitoring allows a supervisor to monitor calls on the
system, with or without the knowledge of the parties engaged on the