3Com NBX 100 Administrator's Manual - page 466
466
A
PPENDIX
D: C
ONNE
X
TIONS
H.323 G
ATEWAY
■
Assemble permissions, licenses, and notifications.
Do not uninstall the current version. You would remove the current
settings.
Assembling System
Information
ConneXtions is installed through an InstallShield wizard. It presents a
series of dialog boxes that request specific permissions and configuration
information. Assemble this information before you begin an installation:
■
Administrator login name:
■
Administrator password:
■
NBX H.323 software and associated port licenses.
■
Caller ID label for outgoing calls. The default is the caller’s extension.
Use the main office telephone number (10 digits in the United States).
■
The system name. Supply the name that H.323 callers see when they
connect to the Auto Attendant.
■
The TCP or UDP port ranges for use with a firewall, if any.
Verifying the
G.723 Converter
Installations that need G.723.1 audio compression require access to a
converter in Microsoft NetMeeting 2.1 or 3.01. NetMeeting must be
installed on the same PC that holds the ConneXtions software, but the
two cannot run simultaneously.
G.723.1 does not appear as a selectable option in ConneXtions unless the
converter is accessible.
To confirm that the convertor is present, search for the
msg723.acm
file
on your hard drive or download it from the Microsoft web site.
Configuring Licenses
To configure licenses, enter system information, such as the number of
H.323 ports that you want to install. You can find this information
through NetSet.
You can purchase licensed keycodes to unlock additional ports. A license
provides a software key that unlocks ports that are already loaded. You
can purchase licenses to enable or upgrade a system to:
■
1, 2, 4, 8, 16, 32, 64 or 100 ports on a V3000, V3001R, or V5000
system
■
1, 2, 4, 8, or 16 ports on an NBX 100 system