3Com NBX 100 Administrator's Manual - page 64
64
C
HAPTER
3: F
EATURE
S
ETTINGS
■
Supervisory Monitoring Error Conditions
Special Considerations
To configure Supervisory Monitoring, you must have Administrator access
rights to the system. If you are a call supervisor, make sure you are
familiar with the following issues when monitoring calls in progress:
■
You can monitor calls internal to the system or external calls.
■
You can monitor a call across a Virtual Tie Line (VTL).
■
Any one of the parties involved in a Supervisory Monitoring
environment (customer, agent, or supervisor) can put the call on hold
and answer another call.
■
You cannot invoke session-modifying services during a call being
monitored. You can invoke the following telephone features during a
call:
■
Forward voice mail
■
Do Not Disturb
■
Mute
■
Hold
The display panel displays the message
Not allowed
if you invoke any
other features during a monitoring session.
■
If the customer or the agent invokes a session-modifying service such
as Transfer, Conference, Call Park, or Transfer to Voice Mail, the
system drops the supervisor from the call.
■
You can use third-party TAPI applications to monitor calls.
■
You cannot monitor more than two calls at the same time. Of the two
calls, only one can be active at any given time; the other call must be
on hold.
■
You can monitor other supervisors. However, you cannot monitor a
supervisor who is monitoring another call.
■
Multiple supervisors can monitor different calls by the same agent.
However, a specific call can be monitored by one supervisor only at
any one time.
■
If you exit the monitoring session, the call between the customer and
the agent is unaffected.