3Com NBX 100 Administrator's Manual - page 303
Configuring the Dial Plan for VPIM
303
Configuring the
Dial Plan for VPIM
To define a VPIM connection between two systems, create entries in the
dial plan for the following items:
■
The digit sequence that a telephone user must dial to access the VPIM
connection
■
The route number that is used to access the other NBX system
■
The extension list to which the VPIM route belongs
■
The operations that must be performed on the dialed digits to create
the appropriate outgoing digit sequence
Figure 19
contains sample lines which, when added to an existing dial
plan, implement VPIM connections to two other systems, one in Atlanta
and one in Dallas.
Table 59
explains each entry.
Figure 19 Dial Plan with VPIM Implementation Commands
Table Create 1 Internal Extensions
/ Id Entry Digits Min Max Class Prio Route
/ -- ----- ----------- --- --- ------------- ---- -----
TableEntry Create 1 45 V82 5 5 WAN 0 532
TableEntry Create 1 46 V83 6 6 WAN 0 533
/ Route Description
/ ----- -----------
DestinationRoute Create 532 Atlanta VPIM Connection
DestinationRoute Create 533 Dallas VPIM Connection
/ Route Entry DestinationExtension
/ ----- ----- --------------------
DestinationRouteEntry Create 532 1 *0003
DestinationRouteEntry Create 533 1 *0003
/ Route Entry OperId Operation Value
/ ----- ----- ------ --------- -----
DestinationRouteOperation Create 532 1 1 stripLead 3
DestinationRouteOperation Create 532 1 2 prepend 10*234*101*222*