3Com NBX 100 Administrator's Manual - page 53
Call Park
53
Call Park
When you park a call, anyone can retrieve it from any other telephone in
the system by entering the Call Park extension that is associated with that
call.
Example: You need to transfer an incoming call, but the person that you
need to reach is not available. You can park the call on any unused Call
Park extension, and then page the person and announce that Call Park
extension. The person can then dial the Call Park extension from any
internal telephone to retrieve the parked call.
These are the default system configuration extensions for Call Park:
■
4-digit dial plan: 6000 through 6099
■
3-digit dial plan: 601 through 609
Adding a Call Park
Extension
To add a Call Park extension:
1 Click Feature Settings > Call Park.
2 Click Add.
3 Enter the number of an extension in the Extension field.
4 Enter a name for the extension in the Name field.
5 Click OK.
Changing a Call Park
Extension Name
To change the name of a default Call Park extension:
1 Click Feature Settings > Call Park.
2 Click an extension.
3 Enter the new name for the Call Park extension in the Name field.
4 Click OK.
Removing a Call Park
Extension
You can remove a Call Park extension at any time:
1 Click Feature Settings > Call Park.
2 Select the extension, or extensions, that you want to delete and click
Remove Selected. To select all extensions, enable the Select check box.
3 Click OK.