3Com NBX 100 Administrator's Manual - Elephone
5
T
ELEPHONE
C
ONFIGURATION
This chapter describes how to configure and manage devices on the
system. It describes these topics:
■
Adding, Removing, and Modifying Telephones
■
Adding a Remote Telephone
■
Creating and Managing Bridged Extensions
■
Creating and Managing Telephone Groups
■
Recording and Monitoring Telephone Calls
■
Creating and Managing Button Mappings
■
Changing Device IP Settings
■
Configuring the Attendant Console
■
Connecting and Managing Analog Devices
For more information about these topics and configuration procedures,
see the online Help.
For information about installing the system hardware components, see
the NBX Installation Guide.
Adding, Removing,
and Modifying
Telephones
This section describes how to add, remove, and modify telephones in the
NBX NetSet utility. You can also review the status of each device and
configure button mappings for 3Com telephones.
Adding a New
Telephone
You can use two methods to configure a new telephone:
■
Auto Discovery method — Auto Discovery is the simplest and most
common method to add a new telephone. When you enable Auto
Discovery and then connect a new 3Com Telephone to the LAN, the
new telephone receives the next lowest available extension number