3Com NBX 100 Administrator's Manual - page 227
Voice Profile for Internet Mail
227
Advanced Settings
The system transmits VPIM voice mail messages by attaching them to
e-mail messages that are sent using SMTP (Simple Mail Transfer Protocol).
You can control the behavior of SMTP and how it sends e-mail messages
with VPIM attachments.
To configure SMTP settings, click NBX Messaging > VPIM and then click
the Advanced Settings tab.
Table 48
lists the fields and describes their purpose.
Last reset command
The date and time of the last reset command. Sets all
VPIM statistics to 0 (zero) and deletes all messages from
the Failed Outgoing Messages queue.
If this field’s date and time are more recent than Last
system reboot, then the system began to collect the
currently displayed statistics at this date and time.
Last system reboot
The date and time of the most recent reboot of the
system. A system reboot resets all VPIM statistics to 0
(zero).
If this field’s date and time are more recent than Last
reset command, then the system began to collect the
currently displayed statistics at this date and time.
Table 47 Statistics Window Fields (continued)
Field
Purpose
Table 48 VPIM Advanced Settings Dialog Box
Field
Purpose
SMTP OK response
The amount of time that the local system waits for
an acknowledgement of a From message.
After the local system sends a MAIL command
specifying the sender of the message, it waits for
acknowledgement from the other site. The
acknowledgement is an OK message.
Minimum: 5 minutes
Default: 5 minutes