3Com NBX 100 Administrator's Manual - page 523
523
MAX-ACCESSread-only
STATUS
current
DESCRIPTION"The IP Gateway address of the gateway."
::= { gatewayEntry 10 }
gatewayDescriptionOBJECT-TYPE
SYNTAX
DisplayString
MAX-ACCESSread-only
STATUS
current
DESCRIPTION"The Description about the Gateway that is connected to the NBX."
::= { gatewayEntry 11 }
gatewayDeviceNameOBJECT-TYPE
SYNTAX
DisplayString
MAX-ACCESSread-only
STATUS
current
DESCRIPTION"The name of the gateway ."
::= { gatewayEntry 12 }
-- The enums that are given here are as mentioned in the dbconst.h. Changing the
order will
-- effect the complexity of code for handling the enums.
gatewayStatusOBJECT-TYPE
SYNTAX
INTEGER {
online(1),
offline(3),
unknownGatewayStatus(100)
}
MAX-ACCESSread-only
STATUS
current
DESCRIPTION"An enumeration that gives the status of the gateway, as
online,offline,unknown,etc."
::= { gatewayEntry 13 }
gatewayNumberOfChannelsOBJECT-TYPE
SYNTAX
Integer32
MAX-ACCESSread-only
STATUS
current
DESCRIPTION"The Number of channels or ports that are onboard for the
corresponding Gateway."
::= { gatewayEntry 14 }