3Com NBX 100 Administrator's Manual - page 342
342
C
HAPTER
12: V
IRTUAL
C
ONNECTIONS
Figure 25 Sample Dial Plan Entries for Rerouting VTL Calls
Explanation:
The TableEntry Create command specifies that when a user on the local
system dials a six-digit number beginning with the digits 72, the call is
routed via route 6, which is the route that normally contains only the VTL
extension list (*0006).
To allow VTL calls to be rerouted, route 6 is configured to use both the
VTL extension list and the Line Cards extension list (*0001). Calls that use
route 6 can be completed using devices in either of these extension lists.
There are four DestinationRouteOperation lines. The first two lines specify
the primary way to manage the call, using VTL methods. The last two
lines specify the backup way to manage the call if the first method fails.
Table Create 1 Internal 4 Digit Extensions
/ Id Entry Digits Min Max Class Prio Route
/ -- ------ ------------ --- --- ------------- ---- -----
TableEntry Create 1 8 72 6 6 WAN 0 6
/ Routes
/ Route Description
/ ----- -----------
DestinationRoute Create 6 Site B
/ Route Entry DestinationExtension
/ ----- ----- --------------------
DestinationRouteEntry Create 6 1 *0006
DestinationRouteEntry Create 6 2 *0001
/ Route Entry OperId Operation Value
/ ----- ----- ------- --------- -----
DestinationRouteOperation Create 6 1 1 stripLead 2
DestinationRouteOperation Create 6 1 2 prepend 192*168*155*100*
DestinationRouteOperation Create 6 2 1 stripLead 2
DestinationRouteOperation Create 6 2 2 prepend 1978247