3Com NBX 100 Administrator's Manual - page 309
Dial Plan Configuration File Commands
309
Example: This example command creates, in route table 3, entry 1
and defines extension list *0003 as the destination for this route entry.
Extension list *0003 contains the voice mail extensions/ports.
DestinationRouteEntry Create 3 1 *0003
DestinationRouteOperati
on Create
Syntax
DestinationRouteOperation Create nRouteId nEntryId nOperId
szOperation szValue
Description
Creates a digit manipulation operation for a destination
route entry. If the specified digit manipulation operation already exists,
this command overwrites it with the new information. During routing the
system processes the entire list of operations in ascending nOperId order
(nOperId 1 first).
Arguments
RouteId
— An integer in the range 1 through 32768.
nEntryId
— An integer in the range 1 through 32768 specifying the
destination route entry to which this operation applies.
nOperId
— An integer in the range 1 through 32768. The system
processes the list of operations in ascending nOperId order.
szOperation
— The name of the digit manipulation operation to perform:
stripLead, stripTrail, replace, prepend, append.
szValue
— A value used by the operation, either the string of digits to
prepend, append, replace with, or the number of digits to strip.
Example: This example command creates, for destination route 3,
entry 1, an operation numbered 1, with the associated function
stripLead, and an argument of 1, indicating that the command removes
(strips) one leading digit from the dialed number before dialing.
DestinationRouteOperation Create 3 1 1 stripLead 1
ExtensionLength
Syntax
ExtensionLength nExtensionLength
Description
The length of extension numbers for system devices. The
default is 4 for V3000, V3001R, and V5000 systems. The default is 3 for
NBX 100 systems.