3Com NBX 100 Administrator's Manual - page 96
96
C
HAPTER
5: T
ELEPHONE
C
ONFIGURATION
Checking a
Telephone’s Status
To check the status of a telephone:
1 Click
Telephone Configuration
>
Telephones
.
2 Click the extension of the telephone for which you want a status report.
3 Click the
Status tab
.
4 View the device status and see the online Help for information about
options.
5 Click OK.
Removing a
Telephone
To remove a telephone from the system:
1 Click
Telephone Configuration
>
Telephones
.
2 Select the telephone, or telephones, that you want to delete and click
Remove Selected. To select all telephones, enable the Select check box.
3 Click OK when the dialog box prompts you so that the system removes
the selected telephone.
4 Click User Configuration > Users.
5 Select the extension, or extensions, that you want to delete and click
Remove Selected. To select all telephones, enable the Select check box.
6 Click OK when the dialog box prompts you so that the system deletes the
selected extension.
If you do not delete the telephone user, the extension of the removed
telephone becomes a phantom mailbox.
Rebooting a
Telephone
To reboot a telephone:
1 Click
Telephone Configuration > Telephones
.
2 Click the extension of the telephone that you want to reboot.
3 Click the
Status
tab.
CAUTION: If the telephone has an active call, you will disconnect the call
when you reboot the telephone.
4 Click
Reset Device
and then click
OK
.
You can also reboot a telephone by unplugging the power connector
from the telephone and then plugging it in again.