3Com NBX 100 Administrator's Manual - page 299
Managing Dial Plan Pretranslators
299
Figure 15
shows an example of a pretranslator that removes the “*”
character from VTL calls that originated on a system with the IP address
10.234.208.2 and prepends the site code, 69, of system 10.234.208.2.
Figure 15 Pretranslator to Remove IP Address and Prepend Site Code
To add a pretranslator for VTL caller ID issues:
1 Open your dial plan for editing as described in
“Accessing the
Dial Plan”
on
page 274
.
2 Search for the section titled Pretranslators.
3 Add a new pretranslator for each system from which you will be receiving
calls over a VTL.
4 Save the edited dial plan and import it into the system. For more
information, see
“Importing and Exporting Dial Plan Configuration Files”
on
page 275
.
5 Specify the devices that use the pretranslator. See
“Adding VTL Devices to
the Pretranslators (Optional)”
on
page 338
.
Identifying Devices
Using Pretranslators
for CLI
To view a list of devices that use a particular pretranslator to present
Calling Line ID (CLI) information about outgoing calls:
1 Click Dial Plan > Pretranslators.
2 Click a pretranslator or click (None) for devices that have no pretranslator.
3 Click the Device Using CLI tab
If you selected (None), you see a list of devices that do not use a
pretranslator for Calling Line ID.
4 To add a device to the list, click Show All and then click to select an
available device from the list. See
Table 58
for field descriptions.
PreTranslator Create 2 VTL
/ PreTransId Entry Digits
/ ---------- ----- ------
PreTranslatorEntry Create 2 1 10*234*208*2*
/ PreTransId Entry OperId Operation Value
/ ---------- ----- ------ --------- -----
PreTranslatorOperation Create 2 1 1 stripLead 13
PreTranslatorOperation Create 2 1 2 prepend 69