3Com NBX 100 Administrator's Manual - page 425
Using the Telephone Local User Interface Utility
425
2 Set my IP
3 Set SubNMsk
4 Set Gatwy IP
Note: On 3101B and 3102B Business Telephones:
2 Configure IP Address
3 Configure SubNetMask
4 Configure Gateway IP Address
Lets you specify the IP information for this telephone.
When entering an IP address:
■
Use the key pad to enter digits 0–9.
■
Use the left and right soft keys or scroll keys to move the
cursor left or right.
■
If any of the fields within the IP address contain only one or
two digits, add leading zeros.
Example: Enter 10.234.1.125 as 010.234.001.125
■
To change a telephone back to its default setting, enter 255
for each octet of the IP address. To clear all configured
settings and return to factory defaults, select menu item AB4.
Note: On 3101B and 3102B Business Telephones, see menu
option 6 Advanced Settings > 3 Set EEPROM - Default for
information about how to return 3101B and 3102B Business
Telephones to their default settings.
■
Press the # key to commit your address change.
5 Set NCP IP
Note: On 3101B and 3102B Business Telephones:
5 Configure NCP IP Address
Lets you specify the IP address of the Call Processor. If the
telephone is on the same subnet as the Call Processor you never
need to specify the Call Processor IP address. If the telephone is
on a different subnet, then you must enter this information or
provide it by using DHCP option 184.
When entering an IP address:
■
Use the key pad to enter digits 0–9.
■
Use the left and right soft keys or scroll keys to move the
cursor left or right.
■
If any of the fields within the IP address contain only one or
two digits, add leading zeros.
Example: Enter 10.234.1.125 as 010.234.001.125
■
To change a telephone back to its default setting, enter 255
for each octet of the IP address. To clear all configured
settings and return to factory defaults, select menu item AB4.
■
Press the # key to commit your address change.
Table 79 LUI Menu Items (continued)
Menu Option
Description