3Com NBX 100 Administrator's Manual - page 513
513
layer3Only ( 2 ) ,
iponFly ( 3 )
}
MAX-ACCESSread-only
STATUS
current
DESCRIPTION"The IP operating mode for connected NBX devices"
::= { ncpSettings 1 }
-- The QOS settings group is required. These settings are not yet finalized, but
placed here
-- for the completeness of the document. Incase these are not available, these
-- will be removed
ncpQosSettingsOBJECT IDENTIFIER
::= { ncpSettings 2 }
-- Provided the stats items as a table indexed by the 'entPhysicalIndex'
-- from the entity MIB. This way if we have a two board system we can show
-- these statistics for each.
ncpTableOBJECT-TYPE
SYNTAXSEQUENCE OF NcpEntry
MAX-ACCESSnot-accessible
STATUScurrent
DESCRIPTION"The Table consisit of one row for each NCP board available in the
NBX System."
::= { nbxCallProcessor 2 }
ncpEntryOBJECT-TYPE
SYNTAXNcpEntry
MAX-ACCESSnot-accessible
STATUScurrent
DESCRIPTION"Indicates an Entry for each NCP in the NCP table."
INDEX { entPhysicalIndex }
::= { ncpTable 1 }
NcpEntry ::= SEQUENCE {
ncpNumberOfActiveCalls Integer32,
ncpIncomingVTLCallFailures Counter32,
ncpOutgoingVTLCallFailures Counter32,
ncpMemoryFree DisplayString,
ncpDosPartitionFree DisplayString,
ncpHtfsPartitionFree DisplayString,
ncpPowerStatus INTEGER,
ncpNumberOfVMPorts Integer32
}