3Com NBX 100 Administrator's Manual - page 537
537
gatewaySIPEndPointDescription DisplayString
}
gatewaySIPEndPointDeviceId OBJECT-TYPE
SYNTAX
Integer32
MAX-ACCESSnot-accessible
STATUS
current
DESCRIPTION"The Device ID of the SIP endpoint."
::= { gatewaySIPEndPointEntry 1 }
gatewaySIPEndPointIPAddress OBJECT-TYPE
SYNTAX
IpAddress
MAX-ACCESSread-only
STATUS
current
DESCRIPTION"The IP address of the SIP endpoint."
::= { gatewaySIPEndPointEntry 2 }
gatewaySIPEndPointPortNumber OBJECT-TYPE
SYNTAX
Integer32
MAX-ACCESSread-only
STATUS
current
DESCRIPTION"The port number being used by the SIP endpoint."
::= { gatewaySIPEndPointEntry 3 }
gatewaySIPEndPointDeviceNameOBJECT-TYPE
SYNTAX
DisplayString
MAX-ACCESSread-only
STATUS
current
DESCRIPTION"The name of the SIP endpoint."
::= { gatewaySIPEndPointEntry 4 }
gatewaySIPEndPointDescriptionOBJECT-TYPE
SYNTAX
DisplayString
MAX-ACCESSread-only
STATUS
current
DESCRIPTION"The description of the SIP endpoint."
::= { gatewaySIPEndPointEntry 5 }
-- The phone Table group starts from here.
phoneTableOBJECT-TYPE
SYNTAXSEQUENCE OF PhoneEntry
MAX-ACCESSnot-accessible
STATUScurrent
DESCRIPTION"The table consists of the list of phones