3Com NBX 100 Administrator's Manual - page 160
160
C
HAPTER
8: PSTN G
ATEWAY
C
ONFIGURATION
Modifying a
Line Card Port
You can modify a line card port that is already configured.
To modify a line card port:
1 Click
PSTN Gateway Configuration
> Analog Line Cards.
2 Click the extension of line card port that you want to modify.
3 Specify the port information. See the online Help for more information.
4 Click OK.
Removing a
Line Card Port
When you remove a line card port that is already configured, you remove
the port information from the system database.
Mapped to a button on the
Receptionist’s Telephone (or
to a button on an Attendant
Console associated with the
Receptionist’s telephone)
500
Receptionist’s telephone rings. If no one answers, the call transfers
to the Automated Attendant.
NOTE: The call coverage point defined for the receptionist’s
telephone has no affect.
The transfer occurs after the number of seconds specified in the
Time Out field for the appropriate time of day (Open, Closed,
Lunch, Other). Click PSTN Gateway Configuration > Analog Line
Cards and click an extension.
Mapped to a button on a
user telephone (or to a
button on an Attendant
Console associated with the
user’s telephone)
Extension of the
Receptionist
User telephone rings. If no one answers, the call transfers to the
Receptionist’s telephone.
The transfer occurs after the number of seconds specified in the
Time Out field for the appropriate time of day (Open, Closed,
Lunch, Other). Click PSTN Gateway Configuration > Analog Line
Cards and click an extension.
If the receptionist’s telephone is not answered, the call transfers to
the call coverage point defined for the receptionist’s telephone.
Mapped to a button on a
user telephone (or to a
button on an Attendant
Console associated with the
user’s telephone)
500
User telephone rings. If no one answers, the call transfers to the
Automated Attendant.
The transfer occurs after the number of seconds specified in the
Time Out field for the appropriate time of day (Open, Closed,
Lunch, Other). Click PSTN Gateway Configuration > Analog Line
Cards and click an extension.
Table 35 Auto Extension Configuration (continued)
Button Mapping Setting
for This Line
Auto Extension
Setting
Incoming Call Behavior