3Com NBX 100 Administrator's Manual - page 30
30
C
HAPTER
2: S
YSTEM
S
ETTINGS
■
If you are adding devices that do not have a display panel, such as
3100 Entry Telephones, connect the devices one at a time and then
refresh the Telephone Configuration > Telephones list after you
connect a device to see the extension assigned to that device.
■
If you are installing a 3Com Attendant Console, connect it after you
have discovered all of the telephones. The Auto Discover Attendant
Consoles process maps all existing telephone extensions to the
Attendant Console.
Disabling the Auto
Discovery Feature
After you finish the Auto Discovery process for the initial configuration,
disable Auto Discovery so that the Call Processor does not continue to
search for added devices.
To disable the Auto Discovery feature:
1 Log in to the NBX NetSet utility using the administrator username and
password.
2 Click
System-Wide Settings > Auto Discovery
.
3 Clear all
Auto Discover
check boxes.
4 Click
Apply
.
Enable Features
System-Wide
From the System-Wide Setting page, you can make changes to these
settings.
■
Extensions Start at
■
External Prefix
■
RTP DTMF Payload Type
■
Caller ID Wait Timer
■
External Paging Delay
■
External Page Alert Volume
■
Handsfree on Internal Transfer / Camp On
■
Handsfree on External Transfer / Camp On
■
System-wide CLIR
■
One Button Transfer
■
Pulse Dialing
■
Supervisory Monitoring