3Com NBX 100 Administrator's Manual - page 488
488
A
PPENDIX
D: C
ONNE
X
TIONS
H.323 G
ATEWAY
However, at the router and beyond, network administrators can influence
H.323 call quality through the priority that they give to H.323 packets at
both the internet router and at the firewall.If H.323 connections
consistently experience significant delays, review the local router and
firewall configurations at each side of the H.323 connection.
Network Checks
A network check uses:
■
Network Ping
■
NetMeeting Connections
Network Ping
A network ping is a packet transfer that checks the logical continuity
between a personal computer and a specified IP (router) address. For
example, you can ping your own address, or the default gateway. The
next ping checks the connection to the IP router at the remote end of the
intended H.323 connection.
The easiest way to initiate a ping is with a DOS ping command. This
command sends four pings to the specified IP address. The router at that
address immediately returns the ping, and the command notes the round
trip delay for each ping packet. Some firewalls do not return pings for
security reasons. If the ping test fails, you can use a “trace router”
command (“tracert”) to find out where the logical connection failed.
To check a connection:
1 Access the DOS command prompt from the DOS shell in Windows.
2 Enter
ping
on the command line:
ping <192.168.1.190>
(sample IP address)
3 Interpret ping results:
a
Request timed out
(all four times)
■
Ping reached the network but couldn’t connect to the host
■
(No such address; or the device is down.)
■
Initial request timed-out
■
(It is normal for a first ping to fail and subsequent pings to
succeed.)
■
Subsequent requests timed-out