3Com NBX 100 Administrator's Manual - page 520
520
A
PPENDIX
G: NBX E
NTERPRISE
MIB
gatewayEntryOBJECT-TYPE
SYNTAXGatewayEntry
MAX-ACCESSnot-accessible
STATUScurrent
DESCRIPTION"Indicates an Entry for each gateway in the Gateway table."
INDEX { gatewayDeviceId }
::= { gatewayTable 1 }
GatewayEntry ::= SEQUENCE {
gatewayDeviceId Integer32,
gatewayMacAddress PhysAddress,
gatewayClass INTEGER,
gatewaySerialNumber DisplayString,
gatewayPartNumber DisplayString,
gatewayHWVersion DisplayString,
gatewaySWVersion DisplayString,
gatewayIPAddress IpAddress,
gatewayIPMask IpAddress,
gatewayIPGateway IpAddress,
gatewayDescription DisplayString,
gatewayDeviceName DisplayString,
gatewayStatus INTEGER,
gatewayNumberOfChannels Integer32,
gatewayModelNumber DisplayString,
gatewayReboot INTEGER
}
-- The gateway class is meant to indicate the type of gateway present in the system.
-- The enum other indicates any other gateway that is present in the system other
than
-- the T1,ISDN PRI,BRI cards that are generally supported.
gatewayDeviceIdOBJECT-TYPE
SYNTAX
Integer32 ( -2147483648 .. 2147483647 )
MAX-ACCESSnot-accessible
STATUS
current
DESCRIPTION"The Device ID of the Gateway connected to the NBX."
::= { gatewayEntry 1 }
gatewayMacAddressOBJECT-TYPE
SYNTAX
PhysAddress
MAX-ACCESSread-only
STATUS
current
DESCRIPTION"The MAC address of the Gateway connected to the NBX."
::= { gatewayEntry 2 }