3Com NBX 100 Administrator's Manual - page 544
544
A
PPENDIX
G: NBX E
NTERPRISE
MIB
notifyGatewayIPChangeNOTIFICATION-TYPE
OBJECTS { gatewayIPAddress,gatewayDeviceName }
STATUS
current
DESCRIPTION"Notifies if there is a change in the IP
Address of the gateway,"
::= { nbxNotifications 9 }
-- The notification gets fired if all the ports get busy in a gateway. The
notification is associated
-- to a mac address so as to inform the user of the device that has fired.
notifyGatewayAllPortsBusyNOTIFICATION-TYPE
OBJECTS { gatewayDeviceName,entPhysicalName }
STATUS
current
DESCRIPTION"Notifies if all the ports of the
Gateway connected to NBX gets busy."
::= { nbxNotifications 10 }
-- spanstatus notification is associated to its name, so that the manager can know
-- which span has sent that.
notifySpanStatusChangeNOTIFICATION-TYPE
OBJECTS { dlcSpanStatus,dlcSpanName }
STATUS
current
DESCRIPTION"Notifies if there is a change in the
span status of the Digitl line card"
::= { nbxNotifications 11 }
notifyChannelStatusChangeNOTIFICATION-TYPE
OBJECTS { dlcChannelStatus,dlcChannelName}
STATUS
current
DESCRIPTION"Notifies if there is a change in the
channel status of the digital line card."
::= { nbxNotifications 12 }
-- Notifies if there is a change in the link status of the gateway. The
-- device name is associated to indicate the manager as to which gateway and which
-- link has sent the notification.
notifyGatewayLinkStateChangeNOTIFICATION-TYPE
OBJECTS { analogLineStatus,analogLineDeviceName }
STATUS
current
DESCRIPTION"Notifies if there is a change in the
status of the line card ports that are
connected to the NBX."
::= { nbxNotifications 13 }
-- Notifies if any of the license limits are exceeded in a NBX.