3Com NBX 100 Administrator's Manual - page 312
312
C
HAPTER
11: D
IAL
P
LAN
szFirstAutoDiscoverExtension
— The first extension used when
autodiscovering external devices. This must be in the specified range of
lowest/highest external extensions.
The system assigns extensions starting with this number and
incrementing upward. For information about the Auto Discovery topic,
see “Using Auto Discovery for Initial System Configuration” in the
NBX Installation Guide.
The default value for a 3-digit system is 750, and for a 4-digit system is
7250. Typically, systems do not use all of the extensions from 600
through 799 (or 6000 through 7999). If, however, the system uses all of
these extensions and needs another one, it starts looking from the
beginning of the range and selects the first unused one.
szDefaultAutoExtension
— The default extension the system uses for
forwarding incoming calls. This is always 500.
The system must direct each incoming call (on an external line) to an
extension. After you import the dial plan configuration file, and complete
the Auto Discovery process, you can manually configure the extension for
each analog line and each Digital Line Card channel, if you want.
PreTranslator Create
Syntax
PreTranslator Create nPreTranslatorId szDescription
Description
Creates a pretranslator. If the pretranslator already exists,
this command removes all of its entries and operations, and overwrites its
description with the new information.
Arguments
nPreTranslatorId
— An integer in the range 1 through 32768.
szDescription
— The description or name of the pretranslator.
Example: This command creates a pretranslator, designates it as the first
one (number 1) and give it the title “4-to-3-digit DID/DDI pretranslator.”
PreTranslator Create 1 4-to-3-digit DID/DDI pretranslator
PreTranslatorEntry Create
Syntax
PreTranslatorEntry Create nPreTranslatorId nEntryId szDigits