Intergraph TD-300 Maintenance Manual - Network Errors
Chapter 7 - Troubleshooting 103
ERROR - PC Card device does not work, or not recognized.
Reason
Solution
Defective PC Card device is
installed.
Insert another PC Card device to
verify the combo drive works.
PC Card device is not compatible
with operating system.
Replace with compatible PC Card
device .
PC Card device installed or
removed improperly.
Verify proper device installation
or removal.
Network Errors
ERROR - Cannot connect to other systems on LAN.
Reason
Solution
Ethernet cable is disconnected.
Re-connect the Ethernet cable,
ensure proper connection. If cable
is properly connected, notify your
System Administrator.
Software configuration is set
incorrectly.
Notify your System Administrator.
ERROR - Cannot plot to network plotter on LAN.
Reason
Solution
Ethernet cable is disconnected.
Re-connect the Ethernet cable,
ensure proper connection.
Plotter is not added to the
available print queues on your
system.
Notify your System Administrator.
Plot node does not recognize your
system.
Notify your System Administrator.