Intergraph TD-300 Maintenance Manual - Preface
ix
Preface
The TD-300, TD-400 Deskside Setup and Maintenance Guide contains
information for setting up, configuring, and servicing your deskside
workstation.
About This Document
The TD-300, TD-400 Deskside Setup and Maintenance Guide is organized
as follows:
♦
Chapter 1, “Getting Started,” describes how to set up the system
hardware and start the system.
♦
Chapter 2, “Configuring the System,” describes how to configure the
video display and the TCP/IP networking software, and how to perform
any additional configuration tasks.
♦
Chapter 3, “Opening and Closing the Base Unit,” describes how to open
and close the system for maintenance and upgrades.
♦
Chapter 4, “Maintaining the System,” describes how to maintain the
system and replace its major components, and how to reprogram the
system’s Basic Input/Output System (BIOS).
♦
Chapter 5, “Upgrading the System,” describes how to upgrade the
system with new components.
♦
Chapter 6, “Using AMBIOS Setup,” describes how to configure the
system’s Basic Input/Output System (BIOS).
♦
Chapter 7, “Troubleshooting,” describes how to resolve common system
problems.
♦
Appendix A, “Installing the System Software,” describes how to install
the operating system and associated system software.