Intergraph TD-300 Maintenance Manual - page 39
Chapter 2 -- Configuring the System 25
3.
Select the Settings tab.
4.
Select Change Display Type. The Change Display Type dialog
displays.
5.
To change the video display adapter, select Change under Adapter
Type. To change the monitor type, select Change under Monitor
Type.
6.
Select Show all devices. From the list, verify that the G95 video
display adapter and your system’s monitor type are selected.
7.
If you want to change the video display adapter or monitor type, and
you have a diskette from the device manufacturer, insert the diskette
into the floppy disk drive and select Have Disk. Follow the prompts
to install the device from the diskette.
If you do not have a diskette from the device manufacturer, select
Show all devices, and select your adapter or monitor type from the
list.
8.
Select OK. The Change Display Type dialog displays.