Intergraph TD-300 Maintenance Manual - page 93
Other manuals for TD-300:
Maintenance Manual
of
138
Chapter 5 - Upgrading the System 79
3.
Loosen the screw to allow the pivoting ISA board guide to swing
toward the system fans. Refer to the following figure.
4.
Install the option board into the first available slot from the system
board. Press firmly to ensure the board seats completely in the slot.
5.
Slide the pivoting board bracket over the edge of the ISA board; then
tighten the screws.
6.
Secure the ISA board to the chassis by installing the I/O lock bracket,
which installs in only one orientation. Mount the bracket to the
chassis using the screw removed previously.
7.
Close the base unit.
ISA Board
Guide
Screw