Intergraph TD-300 Maintenance Manual - page 36
22 Chapter 2 -- Configuring the System
1.
Open System in the Windows NT Control Panel. The System dialog
displays.
2.
Select
Windows NT Workstation 3.51
from the Startup list
box.
3.
Select OK.
Correcting Video Display Problems
If the display is black, not synchronized, or distorted after restarting the
system, you may have a video configuration problem. Do not press
CTRL
+
ALT
+
DEL
to log on to the Windows NT operating system. Instead, try
to correct the problem by using the Last Known Good option to return the
system to the last know good configuration recorded by Windows NT.
➤
To use the Last Known Good option:
1.
Power down and restart the system.
2.
Press the space bar at the following prompt:
Press space bar NOW to invoke the Last Known Good Menu
If using the Last Known Good option fails to correct the video display
problems, you can obtain a functional video resolution by restarting the
system in VGA mode.
➤
To restart the system in VGA mode:
1.
Power down and restart the system.
2.
At the initial boot screen of Windows NT, select the following option:
Windows NT Workstation 3.51 [VGA mode]