Intergraph TD-300 Maintenance Manual - page 45
Chapter 2 -- Configuring the System 31
configure the G95 display driver as described in Appendix A, “Installing
System Software.”
Configuring TCP/IP Networking
Configure the TCP/IP networking software using the networking information
you recorded at the beginning of this chapter.
➤
To configure the TCP/IP networking software:
1.
From the Windows 95 Start menu, select Settings, select Control
Panel, and then select Network. The Network dialog displays.
2.
Select Add. The Select Network Component Type dialog displays.
3.
Select Protocol, and then select Add. The Select Network Protocol
dialog displays.
4.
Under Manufacturers, select Microsoft, and under Network Protocols,
select TCP/IP; then select OK. The TCP/IP software installs.
5.
In the Network dialog, select TCP/IP, and then select Properties. The
TCP/IP Properties dialog displays.
6.
Select the IP Address tab, and then select Specify an IP address. Type
your system’s IP address and IP subnet mask.
7.
Select the Gateway tab. Select the New Gateway field, type the IP
address of your network’s default gateway, and then select Add.
8.
If your network uses the Domain Name System (DNS), select the
DNS Configuration tab, and then select Enable DNS. Type your
system’s name (host name) and your network’s IP domain name.
9.
In the DNS Server Search Order field, type the IP address and select
Add for each of your network’s DNS servers.
10.
Select OK.
11.
In the Network dialog, select OK.