Intergraph TD-300 Maintenance Manual - page 81
Other manuals for TD-300:
Maintenance Manual
of
138
Chapter 4 - Maintaining the System 67
9.
When asked to confirm that you want to reprogram the flash EPROM,
press
Y
,
ENTER
. The following message displays.
Erasing flash EPROM
Programming flash EPROM
Flash EPROM updated, reboot the system
10.
Remove the diskette from the combo drive.
11.
Power off and restart the system.
12.
Press
DEL
when the following message displays.
Hit DEL if you want to run Setup
13.
In the Default menu, click on the Optimal icon. Select Yes to load the
values.
14.
Exit AMIBIOS Setup and restart the system.