Intergraph TD-300 Maintenance Manual - page 38
24 Chapter 2 -- Configuring the System
7.
Type your system’s Internet Protocol (IP) address and IP subnet mask,
and the IP address of your network’s default gateway.
8.
If your network uses the Domain Name System (DNS), select DNS.
The DNS Configuration dialog displays.
9.
Type your network’s IP domain name and the addresses of your
network’s DNS servers, and then select OK.
10.
In the TCP/IP Configuration dialog, select OK.
11.
Restart the system.
Configuring the System in Windows 95
To configure the system when it is running Windows 95, you must configure
the video display and the TCP/IP networking software. You may also want
to perform some additional configuration tasks for your convenience and
security.
Configuring the Video Display
Use the Display Properties application available from the Windows 95
desktop to change the video display configuration for the G95 driver. First,
make sure you have selected the appropriate video display adapter and
monitor type.
➤
To check and change the video display adapter and monitor:
1.
Right-click the Windows 95 desktop. A menu displays.
2.
Select Properties. The Display Properties dialog displays.