Intergraph TD-300 Maintenance Manual - page 40

26          Chapter 2 -- Configuring the System

9.

If your monitor is Energy Star compliant, select the Monitor is Energy

Star compliant check box.

10.

Select Close.  The Display Properties dialog displays.

11.

Select Apply.

By default, the G95 display driver assumes your system has a 60 Hz monitor.

If your monitor is capable of higher refresh rates, you should run the MGA

Monitor application to select a different monitor with a higher refresh rate.

➤

To select a monitor:

1.

From the Windows 95 Start menu, select Programs, select MGA

Millennium PowerDesk, and then select MGA Monitor Program.

The MGA Millennium Monitor Selection dialog displays.

2.

Clear the Use Windows 95 Monitor check box.  The monitor selection

you make in these steps overrides the Windows 95 monitor selection.

3.

Select Selection.  The Monitor Selection dialog displays.

4.

Highlight the appropriate monitor and select OK.  If your monitor is

not listed, or if you are unsure which monitor to select, refer to the

README.TXT file delivered with the G95 video display driver.

5.

Select Test.  The Monitor Test dialog displays.  Use this dialog to test

your monitor selection against various combinations of resolution and

pixel depth.  The combinations available depend on your system

configuration.