Intergraph TD-300 Maintenance Manual - page 26
12 Chapter 1 - Getting Started
➤
To install and display your system’s Online Reference:
1.
Insert the diskette containing the Online Reference into the floppy
disk slot of the combo drive.
2.
Copy the TDDSOR.EXE and README.TXT files from the diskette
to a directory on your system’s hard disk drive; then, remove the
diskette from the combo drive.
3.
Open TDDSOR.EXE. The following files are extracted:
G95.CNT
SUPPORT.CNT
TDZ4DSOR.CNT
G95.HLP
SUPPORT.HLP
TDZ4DSOR.HLP
4.
Ensure the extracted files remain in the same directory for the Online
Reference to work properly. After the files have been extracted, you
can delete TDDSOR.EXE from the system’s hard disk drive.
5.
Open TDDSOR.HLP to display the Online Reference.
You can obtain the latest version of your system’s Online Reference from the
Intergraph Bulletin Board System (IBBS) or Intergraph’s FTP site.
➤
To obtain Online Reference updates:
1.
From the IBBS login, go to Intergraph Product Centers
→
Systems
and Networking
→
File Libraries
→
Technical Notes.
2.
From the FTP login, go to /bbs/ssd/note.
3.
Look for self-executing (.EXE) archive files whose names start with
TDand end in OR(such as TDDTOR.EXE or TDDSOR.EXE).
The file descriptions in the IBBS or the FTP index should note the title and
part number of each Online Reference.