Intergraph TD-300 Maintenance Manual - page 78
Other manuals for TD-300:
Maintenance Manual
of
138
64 Chapter 4 - Maintaining the System
4.
Push the power supply out the side of the base unit.
➤
To install the new power supply:
1.
Place the new power supply in the base unit and slide the power cable
bundle through the opening. Connect the main power cable to the
riser card.
2.
Connect the remaining power cables to the hard disk drives, CD-ROM
drive, and combo drive.
3.
Secure the power supply to the base unit using the screws removed
previously.
4.
Connect the AC power cord.
Screws