Intergraph TD-300 Maintenance Manual - page 87
Other manuals for TD-300:
Maintenance Manual
of
138
Chapter 5 - Upgrading the System 73
3.
Disable the device’s SCSI termination, and set the device’s SCSI ID to
an unused number.
4.
If installing a hard disk drive, mount the disk drive into the slide
bracket using four screws.
Note:
Do not mount tape drives or CD-ROM drives to the slide bracket.
5.
Slide the device into the drive bay and secure it to the metal chassis.
Slide
Bracket
Screw
Screw
Slide
Bracket