Intergraph TD-300 Maintenance Manual - page 44
30 Chapter 2 -- Configuring the System
11.
Select the PowerDesk tab to enable and specify hotkeys. You can set
hotkeys for the following features:
♦
PixelTOUCH toggles the display zoom between x1, x2, and x4.
♦
CenterWINDOW centers the display around the active window.
♦
PanLOCK locks the view to the current display area.
To enable and specify a hotkey, select the appropriate field, and then
press and hold ctrl, alt, and/or shift while pressing a letter key.
12.
Check the Center popup window check box on the PowerDesk tab to
center popup menus in the current display area, instead of centering
popup menus on the virtual desktop.
13.
Select OK.
14.
Restart the system.
You can use the MGA Quick Access dialog to rapidly switch between four
display modes, and to change such features as the PixelTOUCH zoom,
PanLOCK, and CenterPOPUP. To display the Quick Access dialog, select
Programs from the Windows 95 Start menu, select MGA Millennium
PowerDesk, and then select Quick Access. For more information, refer to
the ONLINE.DOC file in the MGA Millennium PowerDesk program group.
Correcting Video Display Problems
If the display is black, not synchronized, or distorted after restarting the
system, you may have a video configuration problem. Check for the
following common video configuration problems and solutions:
♦
A multi-sync monitor is selected, but a graphics display device with
different video timings (such as an Intergraph InterVue monitor) is
connected to the system. Select the appropriate monitor type as
described previously.
♦
The monitor selection set by the MGA Millennium Monitor Selection
application is inappropriate for the multi-sync monitor attached to the
system. Select a new monitor as described previously.
♦
A graphics resolution and color depth has been selected that exceeds
installed Windows RAM (WRAM) display memory. Re-install and