Intergraph TD-300 Maintenance Manual - (Optional).
118 Appendix A -- Installing System Software
5.
Select Next to load both the Quick Access and MGA Monitor
programs.
6.
Read the displayed information, and select OK.
7.
If prompted, type Y to use the Windows 95 Monitor Mechanism
instead of the MGA.INF file.
8.
If prompted to preserve the prior display configuration, select NO.
9.
Display driver files are copied to the system disk. Select OK when
Setup completes copying files.
10.
Read the displayed information, and select OK.
Refer to Chapter 2, “Configuring the System,” for information on
configuring the G95 video display driver.
q
Install the MGA MS-DOS CAD drivers
(optional).
After installing the G95 video display driver, you may install the G95 MS-
DOS CAD drivers and utilities for the G95 display adapter.
➤
To start the MGA MS-DOS CAD installation program:
1.
Insert the diskette containing the G95 MS-DOS CAD drivers into the
floppy disk drive.
2.
Key in the following at the MS-DOS command prompt:
a:\install.exe
➤
To install the Utilities and Setup program:
1.
At the Main Menu, select Utilities and Setup Program.
2.
Press
ENTER
to accept the default directory path. The display driver
files are copied to the system disk.
3.
Press
ENTER
to accept the default boot drive C.