Intergraph TD-300 Maintenance Manual - page 3

Power Input Rating

The product ID information is located on the back of the base unit.  The unit rating is listed in

the “Power Supply” and “Specifications” sections of the TD-300, TD-400 Deskside Online

Reference.

Power Cord Specifications

For units operating at 115 V:  Use a UL listed cord set consisting of a minimum 18 AWG,

type SVT or SJT three conductor cord, a maximum of 15-feet in length with a parallel blade,

and a grounding type attachment plug rated 15 A, 125 V.

For units operating at 230 V (domestic use):  Use a UL listed cord set consisting of a

minimum 18 AWG, type SVT or SJT three conductor cord, a maximum of 15-feet in length

with a tandem blade, and a grounding type attachment plug rated 15 A, 250 V.

For units operating at 230 V (outside of U.S.):  Use a cord set consisting of a minimum 18

AWG cord and grounding type attachment plug rated 15 A, 250 V.  The cord set should have

the appropriate safety approvals for the country in which the equipment will be installed and

marked HAR.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules.  These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment.  This equipment generates, uses, and can radiate radio frequency energy.  If the

equipment is not installed and used in accordance with the instruction manual, it may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

CDC Statement

This digital apparatus does not exceed the Class A limits for radio noise emissions from

digital apparatus set out in the Radio Interference Regulations of the Canadian Department of

Communications.