Intergraph TD-300 Maintenance Manual - page 47
Chapter 2 -- Configuring the System 33
5.
Select Play from the list.
6.
Select Set Default to toggle the setting from bold (on) to normal (off).
To re-enable Auto-Play later, select Set Default to toggle the setting
from normal (off) to bold (on).
Recording with the Keyboard Microphone
If you want to record music or speech with the keyboard microphone on your
system, you must first enable the Automatic Gain Control.
➤
To enable the Automatic Gain Control:
1.
From the Windows 95 Start menu, select Programs, select
Accessories, select Multimedia, and then select Volume Control.
2.
In the Volume Control dialog, select Properties from the Options
menu.
3.
In the Properties dialog, select Recording; then select OK.
4.
In the Recording Control dialog, select Advanced. If Advanced does
not display, first select Advanced Controls from the Options menu;
then select Advanced.
5.
In the Advanced Controls for Microphone dialog, under Other
Controls, select AGC for Waveln; then select Close.
6.
Select Properties from the Options menu.
7.
In the Properties dialog, select Other; then select OK.
8.
In the Voice Commands dialog, select Advanced.
9.
In the Advanced Controls for Microphone dialog, under Other
Controls, select AGC for Voiceln; then select Close.
10.
Select Exit from the Options menu.