Intergraph TD-300 Maintenance Manual - Replacing Parts
Other manuals for TD-300:
Maintenance Manual
of
138
46 Chapter 4 - Maintaining the System
Replacing Parts
This section describes replacing the following parts of the system:
♦
CD-ROM drive
♦
Combo or floppy disk drive
♦
System hard disk drive
♦
Auxiliary hard disk drive
♦
Riser card
♦
System board
♦
Option board fans
♦
System hard disk drive fan
♦
Power supply
You will need the following tools to service the system:
♦
Quarter-inch nutdriver
♦
No. 1 Phillips screwdriver
♦
No. 2 Phillips screwdriver
♦
Three-sixteenth-inch nutdriver
♦
Five-sixteenth-inch or 8 mm nutdriver
♦
Small single-slot screwdriver
Open the base unit, take antistatic precautions, and attach an antistatic wrist
strap as described in Chapter 3, “Opening and Closing the Base Unit,”
before replacing any parts.